Paper Towel Dispenser

SPECIFICATION

Surface Mounted Paper Towel Dispenser shall hold and dispense

standard multi-fold or standard C-fold paper towels and shall be

fabricated of 304 stainless steel, finished in matte black powder coat.

Towel dispensing slot shall have a fully hemmed-in rolled edge for

snag free dispensing and user safety. Dispenser door shall be held

close with a tumbler lock. Unit shall be provided with refill viewer slot

on side panels. Back of unit shall have keyhole slots for hanging on

pre-installed screws (by others).

INSTALLATION

Unit is surfaced mounted on wall or partitioned using four No. 10 self

tapping screws (supplied by others). Four mounting holes through

back are “keyhole” slots for ease of installation on pre-installed

screws. For mounting height standards refer to current Building Code

of Australia for able bodied and/or disabled use.

OPERATION

Towels are self-feeding until supply is depleted. Unit may be refilled

with a partial load in-place and will continue to feed properly. Low

level of towel supply is indicated from 25% capacity empty.

WARRANTY

One year.

Surface Mounted Paper Towel Dispenser – Matte Black shall be

Model No. 10-0210-41 as supplied by ASI JD MacDonald.

All ASI JD MacDonald disabled compliant products when installed

must be in accordance with AS1428 to ensure the specified product is

complying with all washroom specification requirements.

Read more Read less